|
Specifications for PRO 5000 ozone generator
Generation method:
Corona discharge utilizing mica plate technology.
Supply Gas: Ambient Air
Max. ozone output: 5000 mg/hr
Control options: On off switch standard on all models.
- PRO 5000 (Fully variable ozone output control)
- PRO 5000 TV24 (24 hr one shot digital timer in addition to the
variable ozone output control)
- Secure mounting brackets available for all above models
Dimensions: 21"LX 5"W X 6.25"H / 158mm H X 128mm W X
525mm L
Electrical: 120 Volt, .8 Amp, 100 Watt, 50 - 60Hz
Fan Size: 105 cfm
Construction: Stainless steel inner chassis with a high
impact extruded PVC cabinet.
Special features: The PRO 5000 comes equipped with 4"
ozone output and fresh air input spouts. These "spouts" will hook up
to a drier vent hose or 4" thin wall sewer pipe. This feature allows
the installer the route clean dry air into the ozone generator or
route the ozone to where it is needed.
- Secure mounting brackets optional available.
Maintenance: Under normal 24 hr/day use the PRO 5000
ozone generator should be cleaned every four to eight weeks using
dish soap, water and a tooth brush. Cleaning frequency is highly
dependant on the humidity level of the air that the ozone generator
receives.
Warranty: The PRO 5000 is warranted against defects in
materials and workmanship for a period of 6
years from date of purchase. Liability is limited to parts
and labour only. Shipping is the sole responsibility of the
customer. Crystal Air is not liable for damage caused by shipping,
misuse, neglect or lack of regular maintenance.
Uses: This unit is a high output unit designed for the
professional service technician. All generator plates must be used.
Failure to use all plates could cause damage to generator plates,
transformer, etc.. Ideal for use in garbage transfer stations,
restoration work, commercial manufacturing, barns, etc.
|
