 |
 |
 |
Specifications for PRO 700 ozone generator
- Generation method: Corona discharge utilizing mica plate technology.
- Supply Gas: Ambient Air
- Max. ozone output: 700 mg/hr
- Controls: On off rocker switch. Fully variable control for ozone output starting at approximately 20 mg/hr.
- Dimensions: 6.5" H X 5.75" W X 11.5"L, shipping box size 8" H X 6" W X 16" L
- Weight: 5.9 LB, shipping weight 6.9 LB
- Electrical: 120 Volt, .2 Amp, 25 Watt, 50 - 60Hz or
- 240 Volt, .1 Amp, 25 Watt, 50/60Hz
- Fan Size: 34 cfm
- Construction: Stainless steel inner chassis with a high impact extruded PVC cabinet.
- Maintenance: Under normal 24 hr/day use the PRO 700 ozone generator should be cleaned every 4 to 8 weeks using dish soap, water and a tooth brush. Cleaning frequency is highly dependant on the humidity level of the air that the ozone generator receives.
- Warranty: The PRO 700 is warranted against defects in materials and workmanship for a period of 6 years from date of purchase. Liability is limited to parts and labour only. Shipping is the sole responsibility of the customer. Crystal Air . is not liable for damage caused by shipping, misuse, neglect or lack of regular maintenance.
- Uses: The PRO 700 is a small low cost ozone generator designed for use in small rooms and offices up to 3000 sq/ft that may be occupied. This unit does have a variable control for adjusting the output. The output starts at approx mg/hr and goes up to 700 mg/hr.
